Rear steer with 3 link suspension.

[Cranky]

Building a car for a class that only allows three link rear suspension but allows a j-bar or straight panhard bar. Coil over springs and shocks. Can you get a 3 link chassis to raise in the rear and have a bunch of rear steer like a 4 link? How can it be done? Do you raise the left side lower bar front mounts? What type of top link is best? Spring or rubber? Short or long?

[MasterSbilt_Racer]

Sure you can. I have run it on a super LM as recently as last year. If you have enough bar angle and soft enough spring rate, the car comes up.

[Confused?]

You can get a ton of dynamic roll steer with a three link. Sport mods have been doing it for years. It's all in the dynamic angle and droop.

[Austin34471]

A 16 to 18 inch rod at 16 to 18° will put you almost exactly where your standard late model is as far as thrust and rear steer. Assuming you’ll have the spring on a clamp, run as soft as you can and there shouldn’t be a big difference

[Austin34471]

On the LR***