Tweet
WA16pZuL21sWLSUoMHWSNNusciA5LQHAsJBA7z1eQvlp7Ld3x1 Kk8TYLdu3irL
Nope it didn't..
Nope it didn't..
-
Last edited by Krooser; 12-25-2019, 05:36 PM.Member of the Luxemburg Speedway Hall of Fame
Class of 2019 -
Hopefully, it was a XR1 frame!
-
3rd design Howe...Originally posted by ZERO25 View PostHopefully, it was a XR1 frame!Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
-
Shoot...no pix. Going to be a couple days before I get home to fix that.
Anyway I got new updated front xmembers and four bar brackets for my old Smackdown.
Film at 11... Maybe Wednesday night!Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
I'd love to see pics when you get a chance. I'd like to do the same to mine.Comment
-
Hope this works...Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
-
This site sucks for pix... even my photo accounts have issues sharing photos. I'll try on my desk top...Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
Now with photos!!!!
This is the new raised and set-back crossmember. The raised strut X-member is included with this part.
https://live.staticflickr.com/65535/...f78cb58f_b.jpg
This is what it looks like just placed above the old x-member.
https://live.staticflickr.com/65535/...b483e58c_b.jpg
This is what I got including the new 4 bar brackets.
Total cost, with shipping, was $780.00 + or -.
I'm also using a 2" chunk of tubing to take that kink out of the right frame rail behind the RF wheel.
https://live.staticflickr.com/65535/...b3c39bb2_b.jpgLast edited by Krooser; 12-25-2019, 05:35 PM.Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
i commend masters for doing this , you will not get any of the top builders to do this , they will tell you to bring it to them and will charge you half as much as a new chassis , nice to see a reputable company trying to help the little man , which i understand there main concern is selling new chassis , but that market is shrinking.......Comment
-
Im not sure i can totally agree with you their. I have been involved with several repairs of reputable chassis and although they dont necessarily advise it most will sell you whatever you want within reason( front and rear clip peices).But that being said the going rate for a whole front clip is around 1500$ give or take. If you consider your time and labor. Plus the fact that it will be done on the jig. It's really not to hateful compared to what kooser paid for his care package.Originally posted by fastford View PostComment
-
you maybe right and most will , i could have just had a bad experience , im not gone name the chassis , but when they first came out with the new front end , i tried to order one for an older chassis and they gave me the pitch that i could never get it right and they had to do it on there jig and it was way north of 1500 bucks , i told them could not afford what they wanted and the means of doing it myself , they said ok but only if i originally bought it from them , which i didnt , so that ended that......BTW , i later ran across one with the tail clip tore off , bought what was left including front susp for a grand and fixed mine.....Comment
-
I'll be using my home made frame table for the repair. I'll shim it to level as needed and clamp/weld it to the table. Then I'll add temporary reinforcements to keep everything from moving before I cut out the old and install the new.
Tader asked for the chassis # when I ordered the parts... that front x member is spot on with the fit. Looks like I'll be able to trim the new 4 bar brackets to utilize the existing square tube mounts.
I hope to get this deal started soon...Member of the Luxemburg Speedway Hall of Fame
Class of 2019Comment
-
When did Mastersbilt use a straight axle front end?
Comment
Comment