Qualifying

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dfhotlm33c
    Senior Member
    • Apr 2011
    • 224

    #1

    Qualifying

    Wayne county speedway, Orrville OH. I can finally drive the car when the track packs down..

    We qualify/hot lap...track is quite often still practically mud...car literally won't do anything. step on gas, rear end wants to just buzz tires and fishtail practically.. can't get a handle on it at all..everyone else just blows past me (Usually three or four cars on track at at time)

    driving tips for this? Just learn to be smoother on throttle and ease up to speed?

    Drastic change to how car is set up early in night? It's a very vanilla old setup (500 LF, 450 RF, 200 LR, 250 RR, bars as stated in setup sheet, j-bar 1" down pinion, 1 hole down on frame, 4" stagger, 100 LR bite, 55 left, 54 rear)

    Tires? 1300 rule...should I groove them more? Less?

    ideas?
  • noitall93w
    Senior Member
    • Aug 2020
    • 181

    #2
    That setup is ancient. How old and what car is it?

    Comment

    • MasterSbilt_Racer
      Senior Member
      • May 2007
      • 14304

      #3
      Originally posted by noitall93w View Post
      That setup is ancient. How old and what car is it?
      He has a wide Mastersbilt.
      Modern Day Spec Wedge Racing

      Comment

      • Jking24
        Senior Member
        • Oct 2017
        • 1512

        #4
        Put the leaf springs back on it !

        Comment

        • noitall93w
          Senior Member
          • Aug 2020
          • 181

          #5
          First thing I’d do is get rid of that LR spring. In the mud with a crate or even super I’ve never buzzed the tires. Something sounds odd

          Comment

          • MasterSbilt_Racer
            Senior Member
            • May 2007
            • 14304

            #6
            Back when I raced those cars, you couldn't hook up in the slime. Pretty sure he's suffering from lack of CG movement the newer cars have.
            Modern Day Spec Wedge Racing

            Comment

            • dfhotlm33c
              Senior Member
              • Apr 2011
              • 224

              #7
              So, more j-bar angle? Raise j- bar both ends? Move ballast higher? I’m assuming newer tires that are grooved properly might help? Lots of grooves and very few of no sipes?

              Comment

              • noitall93w
                Senior Member
                • Aug 2020
                • 181

                #8
                Yeah slime and mud are different. I was thinking he meant when the track was hooked up. Not when it was greasy. That’s hard to hook up yes

                Comment

                • dfhotlm33c
                  Senior Member
                  • Apr 2011
                  • 224

                  #9
                  Yeah. Complete slime. Not even remotely hooked up. The water trucks have basically just pulled off and we are usually the first to qualify. And I’ve pulled pills such that I’m the first or second group on the track. Just looking for advice on how to drive that or work the tires or change setup so I can at least go somewhere haha.

                  Comment

                  • Jking24
                    Senior Member
                    • Oct 2017
                    • 1512

                    #10
                    From my experience in this condition you need to be a combination of free and tight. Free from a wheel base standpoint aswell as drive distribution you need the car to want to rotate when off the fuel then you need the car to turn on fuel because the steering is useless so lengthen right side bars and raise them both. But you need help with weight transfer so j bar high on the frame and low on the pinion take compression out of right side shocks. Basically you can't use the steering wheel so the car has to turn on its own then once it turns it need to dig in or be so over rotated that your essentially using your forward wheel spin the keep you from backing out of the park. Some times it helps to think about the fundamentals of what's not happening in this condition. In this case you can't steer and even if you could the car doesent stick lol

                    Comment

                    • MasterSbilt_Racer
                      Senior Member
                      • May 2007
                      • 14304

                      #11
                      Originally posted by Jking24 View Post
                      From my experience in this condition you need to be a combination of free and tight. Free from a wheel base standpoint aswell as drive distribution you need the car to want to rotate when off the fuel then you need the car to turn on fuel because the steering is useless so lengthen right side bars and raise them both. But you need help with weight transfer so j bar high on the frame and low on the pinion take compression out of right side shocks. Basically you can't use the steering wheel so the car has to turn on its own then once it turns it need to dig in or be so over rotated that your essentially using your forward wheel spin the keep you from backing out of the park. Some times it helps to think about the fundamentals of what's not happening in this condition. In this case you can't steer and even if you could the car doesent stick lol
                      And newer cars have more drive and more steer.
                      Modern Day Spec Wedge Racing

                      Comment

                      • Jking24
                        Senior Member
                        • Oct 2017
                        • 1512

                        #12
                        Originally posted by MasterSbilt_Racer View Post
                        And newer cars have more drive and more steer.
                        I definitely agree

                        Comment

                        • powerslide
                          Senior Member
                          • May 2007
                          • 2696

                          #13
                          Gotta keep the wheels spinning don't let them hook up or you will dump truck push. I will leave the suggestions for changes to the guru's. Guys try jabbing at the gas and usually make it worse

                          Comment

                          • MachineMasters
                            Member
                            • Oct 2010
                            • 74

                            #14
                            just some thoughts here..

                            more rear stagger and the 5th coil moved back may help.

                            soften up the compression on your right side shocks if you can.

                            add a couple psi to the RR tire.

                            if it's really greasy, taking a couple rounds out of the RF spring could help force the car into posture somewhat. It also de-wedges the car to help turn on throttle.

                            Raise Lower left 4-link bar up on the chassis a hole or two, to add additional rear steer.

                            not saying i would do all of these, but some changes to consider.

                            Comment

                            • CCHIEF
                              Senior Member
                              • Jul 2014
                              • 399

                              #15
                              I typically go to RR tire pressure increase and decrease 4 " load #, as these conditions typically don't last very long, and you need the car to turn in well, and return to basic settings quickly, possibly in staging. With an older car/type deal, who knows. WAY back when my wide combo car just sucked all around.

                              Comment

                              Working...
                              X