RF stack, which on top ?

[RacerX10]

10" 200# , 7" 700#

I think I've mounted these up backwards with the 10-in 200# spring on top .. anybody confirm?

Right now that 200 lb spring is bowing just a bit and rubbing a little against my lockout nut.

also the separator between the two springs is barely on the shock body.

[Punisher88]

You likely have the wrong combo for the length of your shock/ center to center measurement. You may require a shorted top spring. I also like using barrels on the top to reduce deflection

[MasterSbilt_Racer]

Soft spring goes on top. It compresses more so you hit the lockout. That combo would fit on my car, but probably not all, as punisher suggests.

[TRocket8]

10" 200# , 7" 700#

I think I've mounted these up backwards with the 10-in 200# spring on top .. anybody confirm?

Right now that 200 lb spring is bowing just a bit and rubbing a little against my lockout nut.

also the separator between the two springs is barely on the shock body.

Do you have the Thrust bearing kit on the coilovers?

[RacerX10]

Do you have the Thrust bearing kit on the coilovers?

i do .. under the top nut / coil holder