getting my barnes pump rebuilt??

[mudderfudder]

I just went on the Barnes site and i didnt see any tab for info or any address at the bottom of the page, where can ii get the info or were would i send my pump out to get rebuilt. I'm new to the dry sump deal and the is the 1st time getting on rebuilt.

Thanks in advance!

[hucktyson]

Just call barnes and they will give you the adress, it comes back like a brand new pump, i had a 5 stage that a broken lifter went though so pretty much worst case scenerio and it was 270.00 with shipping to fix

[mudderfudder]

Im sorry but only place i see there number is on their logo and i cant read the dang thing, could ya give me their number if ya got it handy? thanks a ton.

[JTSjet]

Barnes Systems, Inc.
3162 Kashiwa St.
Torrance, CA 90505
(310) 534-3844

[grt74]

wolf pumps in middle tn can rebuild it also and he also sells his pumps too super nice guy to deal with and always helpful if your having problems which to me on an all aluminum motor with the prices these days is a great service

[mudderfudder]

Thanks JTS,wrote it all down and in my phone now. grt74, can you hook me up with a number and address as well thats alot closer to me and i would like to talk to him to see if he would be able to get my pump done up for me. Thanks again

[fast_crew]

The pumps are so simple we do them ourselves, pull apart inspect for worn or damaged gears and housings, bearings, replace seals and orings if you feel the need, reassamble. Clean and inspect bypass. One pump needed a driveshaft, a housing, a gear set, keyways, a bearing, seals & o-rings. About $ 130 with shipping.

[TALON75]

I rebuild my own also, they are very simple and unless you had a lot of metal go through it the hard parts should not need to be replaced, just the seals .

[grt74]

i guess i could spell the company name right for ya (i dont know what i was thinking had a brain fart i guess) wulff pumps #615 822 6832 www.wulffpumps.com hope this helps

[talclipse]

I recommend Wulff as well.Ed is a great guy to deal with. The support you get when dealing with Ed is unmatched.

The pumps are very simple; but, when compared to the price of a motor I'll send it to a professional and pay a few bucks to ensure that there are no issues.

[lazermod3]

ed wulff is an awsome guy to deal with plus he's been building them since 3 days before dirt