Progressive 5th coil spring????

[Matt49]

Well. Rayburn built a leaf car this year.

And it has been running well (if we're talking about the same car).
The guy wheeling it has quite a bit to do with it though.

[MasterSbilt_Racer]

And it has been running well (if we're talking about the same car).
The guy wheeling it has quite a bit to do with it though.

Chinn drove it in it's debut. Where is it now?

[hpmaster]

Anyone ever run one on a corner coilover ?

When we got it last winter first thing we did was put it on the spring checker. I cannot remember exactly how the numbers were but at about an inch and a half it went to like over 550 lbs instantly, sorta like coil bind.

[Matt49]

Chinn drove it in it's debut. Where is it now?

Not sure if we're talking about the same car or not. I'm talking about the car that Marty O'Neal has been driving lately. I'm pretty sure it's the same car that C.J. had out earlier in the year because it has a unique driver side door/window with a little flip down section. I keep meaning to ask Marty but I end up with other things on my mind at the track. He's been running pretty well in it.

[MasterSbilt_Racer]

Not sure if we're talking about the same car or not. I'm talking about the car that Marty O'Neal has been driving lately. I'm pretty sure it's the same car that C.J. had out earlier in the year because it has a unique driver side door/window with a little flip down section. I keep meaning to ask Marty but I end up with other things on my mind at the track. He's been running pretty well in it.

OK. That jogged my memory. It is the same car I am pretty sure.