2001 Grt setup help.

[jeredb]

I'm new to late model racing and need some opinions. I will be racing at Coos Bay speedway in Oregon if you would like to check it out on youtube. Its real tacky clay that rarely slicks off. this is what the car came with. it has s7z bilstiens on the frone and 9s on the rear. grt birdcages.

RF 350 3/3
LF 400 3/5
RR 225 5/3
LR 250 5/3
I also have a set of afco 13 series. I have a 1374, 1375, and two 1394s.
Any help is appreciated.

[sj valley dave]

We run a GRT in CA...We normally run the WCLM and DIRT series races, which are usually a little on the slick side, but we have gone to Petaluma which is a heavy, hooked up natural clay and been as fast as the swing arm cars...2nd quick time at the Maselli race 2 years ago with 32 cars in the pits...If you would like some hints, PM me and I'll give you some set up ideas that have been proven to work...

[RACR_73s]

We run a GRT in CA...We normally run the WCLM and DIRT series races, which are usually a little on the slick side, but we have gone to Petaluma which is a heavy, hooked up natural clay and been as fast as the swing arm cars...2nd quick time at the Maselli race 2 years ago with 32 cars in the pits...If you would like some hints, PM me and I'll give you some set up ideas that have been proven to work...

Tried to send you a PM and your box is full. ~Thanks~

[sj valley dave]

Try again, my inbox does not show it's full..