2005 mastersbilt smackdown ride height

[jac20]

what is the proper ride height on the right rear for a 2005 mastersbit smackdown chassis?

[hall99]

I used to run mine around 7 3/8 to the axle tube.

[Matt49]

7 3/8 is correct

[jac20]

thanks much appreciated.

[dbr25]

Don't mean to hi jack thread but I have a Smackdown copy and need some measurements. With a smack at ride height you just mentioned, measure from center of RR shock mount down to axle tube. Also need measurement from center of j bar mount(center of 2" square tube) to center of LR 4 bar mount. Thanks this will help me locate rearend left to right and correct ride height. My framerails are not in the same location as a smack.