Masters smack car side bite

[teammastersbilt]

Hey guys I have been free on entry in slick conditions and was wondering if any one has had any luck running a 250 RR spring I have been running a 225. I have been running the RR bottom rod in the bottom hole and shortened the RR rods 2 turns and don't seem to have enough side bite.

[MasterSbilt_Racer]

You are going to need to post more setup info like springs and wheel weights. How much rr shock travel are you getting? rf shock travel? A 250 can work. It could also make you worse if you can't get the weight up and over on it during chassis roll.

[11jcr51]

Hey guys I have been free on entry in slick conditions and was wondering if any one has had any luck running a 250 RR spring I have been running a 225. I have been running the RR bottom rod in the bottom hole and shortened the RR rods 2 turns and don't seem to have enough side bite.

We run a 250 in the RR and moved the shock 1 hole in board and have had success.