Heim Maintenance

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sj valley dave
    Senior Member
    • May 2007
    • 1016

    #16
    We've used a dry film silicone spray...It seems to work well and does not attract dirt like WD-40 does...

    Comment

    • fastford
      Senior Member
      • Dec 2008
      • 4059

      #17
      wd40 is good for rust penetration and arthritis, it has no lubrication properties, i use a product made by schafer called pentro 90, its the best i ever used and cost about 5 bucks a can.

      Comment

      • racer241
        Member
        • Oct 2010
        • 57

        #18
        alright sweet that penatro90 is what i just bought, definitely got rid of the squeaky car!

        Comment

        • joedoozer
          Senior Member
          • Nov 2009
          • 745

          #19
          What about this?

          http://www.autozone.com/autozone/acc...ier=41736_0_0_
          Crew Chief "Tip of the day":
          Most handling problems can be solved by adjusting the screw-ball. It can be difficult to fine tune at times. Explaining yourself loudly and striking it on top of the helmet with a dead blow hammer usually works well.

          Comment

          • thems20s
            Junior Member
            • Jan 2009
            • 22

            #20
            I always spray mine out with Pennzoil Z4 after washing and then again before the car gets loaded for the track and at the track. Seems to work as good as anything.

            Comment

            Working...
            X