Tweet
My Bert Gen 2 tranny is leaking out the tail shaft. I replaced the seal several times but it just keeps leaking. It is a slow leak but it makes me nervous as to how much fluid it may be losing during the course of a race plus it's just a mess. Is there something further in the tail housing that might be wrong and allowing it to leak? Thanks for any halp in advance. John 1*
-
"Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back."
— Heraclitus -
Did you replace the tailshaft bushing as well? If it's damaged or missing, the extra slop will ruin the rear seal in a hurry. -
Check your drive shaft yoke I have seen some of the cheaper ones that don't have a plug behind the splines & it will leak out there. its an easy fix just get the proper size freeze plug.
MLR19Comment
Comment