shorty bar on a Mastersbilt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fast19
    Junior Member
    • May 2013
    • 3

    #1

    shorty bar on a Mastersbilt

    Wondering if anyone has ran this before? Likes or dislikes?
  • MasterSbilt_Racer
    Senior Member
    • May 2007
    • 14324

    #2
    Originally posted by fast19 View Post
    Wondering if anyone has ran this before? Likes or dislikes?
    Are you talking about a short panhard from the left of chassis to left side of pinion?
    Modern Day Spec Wedge Racing

    Comment

    • rubbinsracin
      Senior Member
      • Aug 2009
      • 668

      #3
      Originally posted by MasterSbilt_Racer View Post
      Are you talking about a short panhard from the left of chassis to left side of pinion?
      Thats what it sounds like to me. wouldnt that make the car react faster and be more tempermental to drive?

      Comment

      • lcpestka
        Senior Member
        • Aug 2007
        • 144

        #4
        16" shorty bar left side of pinion looser in and tighter off. If bein used on a 05-06 masteres would work pretty good as those cars are using the 17.5 and 15.5 bars which gives a tighter rear steer than the newer stuff. Cars also have less front to rear rake which tends to make the car fall easier on the RR making it to tight entering. Common Masters problem, throw and go

        Comment

        • crash46
          Junior Member
          • May 2010
          • 14

          #5
          Are you talking about short J-Bar or a short 4-Bar, if 4-Bar where, top, bottom, left or right.

          Comment

          Working...
          X