2010 rayburn 4 bar....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jsw444
    Member
    • Apr 2008
    • 68

    #1

    2010 rayburn 4 bar....

    need more forward drive in the slick........650lf....350 rf....225 lr.....250 rr...panard bar 10.5 inchs on frame 1 inch below pinion.....55 left...56 rear....120lbs bite.....car gets in good, rotates center great,just no drive off......any suggestions....we are on american racer md56 tire as well.....
  • janke27x
    Senior Member
    • Dec 2011
    • 107

    #2
    if its not a crate motor try a 400 on the rf and a 175 on the left rear.

    Comment

    • powerslide
      Senior Member
      • May 2007
      • 2696

      #3
      where is the lift arm? what shock/spring?

      Comment

      • jsw444
        Member
        • Apr 2008
        • 68

        #4
        thanks guys for the reply.....5th coil i think is at 34 inchs with a 3comp 8 rebound......350 spring.....
        i thought about trying to stiffen rf my self...thought maybe there was too much rear steer.....the track went tacky since i posted this so havent tried it yet.....now the car owner is buying a 2014 4 bar rayburn.......need to know which is better and why......underslung or over rail......

        Comment

        • stevo
          Senior Member
          • Jun 2008
          • 622

          #5
          Neither will be better just cause of the bars,under a bit stronger over more room to work.

          Comment

          Working...
          X