tight in center

[racedad17]

what would you do to correct tight in center? i know this is hard without alot more info but im sure someone could help without all the info. im looking for some help on this to see if im on the correct path. im thinking theres a general adjustment that i should look at but getting confused on what it is.
thanks for your help

[Matt49]

Tight rolling through the center?
Tight when getting back in the gas in the center?
Or both?

[racedad17]

both, rolling thru corner off gas in center pushes nose, back on throttle off corner pushes nose to wall
thanks

[TALON75]

Either right side bar up on the frame

[setup479point2]

Raise j bar on pinion . Mainly affects center of corner. If you really want the best answer you need to give as much info as possible , we gladly help those who show us that they really want our help.

[Matt49]

Many possibilities. Post your scaling numbers, springs, shocks, bar locations, stagger, etc.

[jedclampit]

This will be very dependent on the attitude of your car, if it hikes down the lr a bunch that reduction in rear steer will tighten the car considerably.
The track condition is also key in making the correct adjustments.

[powerslide]

If its tight in the center its likely that its tight getting in, or the driver isnt making a good arch into the corner. Look at the adjustments to correct a tight entry problem and it will be more rotated by the time you hit the center. Otherwise w/o more info on the car's setup its a crap shoot.