2010 rayburn on swing arm

[dirtdodger]

just got a 2010 rayburn set up on swing arm. looking for setup information as he had no info on car. also it has a weld on front bumper is it possible to put the slide on style like on a rocket on it?
all my experience is with 4 bar cars i have absolutely no knowledge on what to do with a swingarm car so any help would be greatly appreciated.

[jsw444]

if it was me and the 4 bar brackets are there i would put it on the 4 bar......if not i have the setup sheet for that car on the swing arm.....let me know...

[dirtdodger]

they are its a combo car

[old17ford]

if it was me and the 4 bar brackets are there i would put it on the 4 bar......if not i have the setup sheet for that car on the swing arm.....let me know...

Do you use RAYBURNS pull bar with the 4 bar set up ?

[2old4this]

On my crate car I stayed on swingarm used 500lf 550 rf500rr 350 lr short pa are bar lr shock had a lot of compression in it. Use the rear bars like top bar on 4 bar instead of raising top front on 4 bar lower rear bar on swing arm to give it more drive on that side.

[jsw444]

no on the pull bar.....dont have much experience with it so we use lift bar with 325 on 5th and 400 on sixth preload 2 turns....if its a combo car i would deff run it in the 4 bar setup.....

[Rayburnracecars1]

Dirt Dodger,please contact us here at the shop and we will get you lined out. 317-535-8232

[2old4this]

It's about time you chimed in Greg!!!!