Tweet
Just bought a 03 rocket and want to see if it has the correct axle lengths. I have not had time to pull the axles.can someone tell me the measurements from rotor to where the tube goes into the housing. And also tell me what the axle lengths should be.thanks dennis
-
-
The Axles are 33/36 IMO its easier to just pop the drive flange off its a few bolts and pull it out. 5mins and your done. Some of the sites that sell the tubes have a rough measurement the Right side should be like 30" overall and like 24.5 to the bearing and it goes into the bell 5" I believe. -
Yup 5 inches in the bell would be 19.5 from bell edge to bearing shoulder for a 36 inch axle. The 33 would be 16.5 from bell to bearing shoulder.Comment
Comment