Crossmember

[LM90]

Rocket new raised crosmember does it use the same rack?

[Brian Gray]

Clevis type is needed

[LM90]

Thanks , can you change the ends on your excisting rack?

[Matt49]

Thanks , can you change the ends on your excisting rack?

Yes you can. Not terribly difficult. Pull back the rubber boot and there's a set screw. Once the set screw is out the entire end threads off of the rack.

[rocket1*]

The slotted ends also make setting the bump steer much easier.

[toloud]

Rack

Rocket new raised crosmember does it use the same rack?

Yes you can use the same rack with the same ends. I did not measure the spacer between the rack and frame but it looked 1/8. RF needs the small spacer that comes with a sweet rack at the rack nothing at the spindle. LF needs 200 thousandths at the rack and I think 1/2 at the spindle.
If it is different i will correct as soon as have time to get to te shop.