Tweet
I have an '05 Rocket black front end I bought last year. While checking over everything, I noticed that there are 2 holes for the right front lower in the cradle and for the front rod on the 1 piece lower. Also the rack has 2 holes. All of mine are in the inside holes. Is this right? Doesn't the right front benefit from the outside holes? Any insight would be appreciated,
-
-
The wide rf seems to be preferred but without the right rack width the steering can get very questionable. Most people I know with black fronts are still using the original holesShocks by BGR army -
I correct myself the wide mount is preference on the blue gray orange cars .Shocks by BGR armyComment
-
Brian are you going to give him that top secret black front set up you won all of those crown jewel races with ??Comment
-
Going by the Rocket set up book, the outside position on the rack would be correct. But if I moved the lower out and went to the reccommended rack position., I would need a longer upper, or more shims to get the required camber. I am running the spec'd upper as well as Rocket lowers. Something just doesn't to make sense.Comment
-
Yes you need to space out the upper arm to get the correct camberComment
-
here you go again huckyboy!!!!! Picking on people, and you sure as heck aren't setting the latemodel world on fire..... Listen to brian, totally ignore huckyboy.Comment
-
This sounds to me like you have a blue/gray car not a black.Originally posted by LimitedLM06 View PostComment
-
I'd agree I would say check your spindle if its a rocket spindle or see if you have different steering arm positions or call rocket. I haven't seen any Wide RF Blacks unless its a custom buildComment
-
Thanks guys, I'm gonna call Steve at RocketComment
Comment