ohlins canister shocks

[rocket21j]

Just wanted to know what guys where using to clamp there canisters to the frame. I heard most guys are using the Joe's clamps. Is there anything else out there pretty nice. Thanks

[throwin_dirt56]

call out pace.. they have awesome brackets.. 815 275 0221 they will send them

[sobe92]

no matter what brand you choose remember to clamp on one end or the other if you clamp down in the middle then you risk sticking the divider (floating) piston in the canister. the joes clamps with the nylon strap are really good but expensive. if you use these just run a zip tie through the ring on the pin so you never drop it and lose it in the dirt.

[talclipse]

I have a set of the Rocket clamps. With them they clamp to the chassis and then you wire tie the canister to them. I would be willing to sell them for $100.00 shipped if you are interested.

[grt74]

i myself would save the money and use 2 hose clamps for each canister like some of the guys said clamp them on the ends not in the middle