4 link setups

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • FAH-Q
    Senior Member
    • Apr 2008
    • 195

    #1

    4 link setups

    Was doing some reading and seen where integra said that you can clamp your lr front shock on a clamp and leave you other shock behind with the spring on it and run it like that for real slick conditions?? Is this the same as running clamped with the shock with a spring on it in front??
  • GRTLRBITE
    Senior Member
    • May 2007
    • 787

    #2
    Shock and spring in rear and just shock only on clamp in ft. So when axle rotates whelp left car on lr

    Comment

    • WarsawSuspTec
      Member
      • Mar 2010
      • 72

      #3
      When it slick`s over real good,i have mine clamped up with 200 psi in the shock,work`s good

      Comment

      • arrt
        Member
        • Jun 2007
        • 52

        #4
        Where can I look to see a pic of the clamp bracket??

        Comment

        • stunner
          Senior Member
          • May 2007
          • 3594

          #5
          Its an excellent set-up. I ran it with alot of success. I've got a few nice used clamp brackets left if your needing one. Call me 815-990-8865

          Comment

          • Jazz
            Member
            • Jun 2007
            • 82

            #6
            What valving to you guys typically run when you use this setup, for both the shock on the clamp and with the spring behind?
            Would a 7-2 in front and 5-3 behind be too aggressive?

            Comment

            Working...
            X