Smackdown S7 or GenX RF

[CDNRocket18R]

I currently run the S7 front on my smackdown. Ive seen alot of posts about a GenX RF on these cars. Whats the difference between these 2 fronts. Thanks

[SLM98]

The long rf smack lower is 18 5/8 long. The GenX is 19 which you can cheat out another 1/4 with the hiem. You spacer out the upper. This tightens the car overall

[HuckleberryB4]

What do you set ride hts at?

[MasterSbilt_Racer]

What do you set ride hts at?

It is just the lower control arm. No change.

[HuckleberryB4]

Same length upper as well? Or does it need spaced out too? Thank you.

[MasterSbilt_Racer]

Same length upper as well? Or does it need spaced out too? Thank you.

That is how I would do it. (Spacer) I was having my own lowers built then found out the Gen X was the same as what I was making.

[dirtdiggerracing]

What is the pin inclination in ea of the different masters spindles ?? What is y'all's opinon on pin inc ???

[hucktyson]

The gen x car has 10 degree spindles , I never measured a smackdown but I guarantee they are less than 10 degree .

[tin man]

What I've been told is that the smack is 5. The s7 7. The gex x 9 and the mbh 10.

[CDNRocket18R]

Anybody put the genx spindles on a smackdown instead of the s7?