Help with fuel issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • k33
    Junior Member
    • Apr 2008
    • 5

    #1

    Help with fuel issues

    358 Late model on alcohol running out of fuel(running lean and getting warm/hot) on the track. Has happened with 2 different engines and at 3 different tracks. Have tried 2 different carbs, new fuel pump, new regulator, new fuel line, new fuel filter (yes, it's in right). Idles fine and good fuel pressure in garage or pits. 4-6 psi at idle, 10-12 at 3500 rpm. The driver has reported 3-5 psi on the track at wot.
  • RSS
    Senior Member
    • Dec 2013
    • 128

    #2
    Check the pick up in cell

    Comment

    • k33
      Junior Member
      • Apr 2008
      • 5

      #3
      Dropping fuel cell today and looking there. Any other ideas on things to check.

      Comment

      • hucktyson
        Banned
        • May 2007
        • 1903

        #4
        What kind of fuel pump are you running ?

        Comment

        • k33
          Junior Member
          • Apr 2008
          • 5

          #5
          Procam 15 psi pump

          Comment

          • rakracing
            Senior Member
            • Dec 2014
            • 218

            #6
            pressure test your line from tank to pump, and check the tank vent

            Comment

            • Punisher88
              Senior Member
              • Nov 2014
              • 495

              #7
              Are you running a dead head regulator or return? I prefer the return style..

              Comment

              • Dirtmod13
                Senior Member
                • Jan 2014
                • 245

                #8
                Check line sizes and points where they are strapped/ zip tied to the frame. My last car had the lines nearly pinched off from too tight of zip ties. Heard of some of the cheap push lock hose getting soft from just e85. My parts guy said I could use afco line but not his cheaper version because it wasn't rated for alcohol.

                Comment

                • AmickRacing
                  Senior Member
                  • Feb 2008
                  • 236

                  #9
                  I had some fuel line start collapsing causing some goofy problems and pressures. It was the rubber liner that started collapsing when there was a fair bit of suction on that hose. Replaced it and life was much better.
                  Here's my little home on Youtube!
                  http://www.youtube.com/user/AmickRacing
                  Home Page
                  http://www.AmickRacing.com

                  Comment

                  • k33
                    Junior Member
                    • Apr 2008
                    • 5

                    #10
                    Thanks for all the suggestions. Made some improvements in the pressure over the weekend. Still not what I'd like to see pressure wise, but definitley made some improvements.

                    Comment

                    • eight r
                      Member
                      • Feb 2008
                      • 91

                      #11
                      Put hose clamps on all fuel line fittings. I ran the push lock fittings and had same issues. I put hose clamps on the fittings and problem solved

                      Comment

                      • dirtrace09
                        Senior Member
                        • Aug 2007
                        • 746

                        #12
                        Make sure you are running AN10 size line to the pump to feed it. Also as suggested, run a return bypass system instead of a regulator. Check float levels.

                        Comment

                        Working...
                        X