birdcage holes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 37mod
    Member
    • Feb 2008
    • 88

    #1

    birdcage holes

    What are the second set of holes in front of the normal top holes on my birdcage for? I've never used them and they are on most birdcages.
  • 37mod
    Member
    • Feb 2008
    • 88

    #2
    No replies? Does this mean we all have something that none of us use and know nothing about?

    Comment

    • Matt49
      Senior Member
      • Jun 2007
      • 3123

      #3
      You use it for a shorter upper bar and it helps the birdcage index faster.

      Comment

      • 37mod
        Member
        • Feb 2008
        • 88

        #4
        thank you Matt49. So I use it on short tight corner tracks? How is it different than dropping top bar in normal holes?
        Last edited by 37mod; 06-14-2015, 02:47 PM.

        Comment

        • Brian Gray
          Senior Member
          • Feb 2012
          • 1102

          #5
          The motion ratio change is much larger and quicker. You also change indexing with a varied drive angle.
          Shocks by BGR army

          Comment

          • HMS27
            Member
            • May 2011
            • 57

            #6
            The 4 bar cars started out with 2 or 3 holes on the top and bottom brackets. The old tube type bird cages were just one hole. Car builders decided to put 10,000 holes everywhere so you could really put yourself out in left field. Lol
            If your not racing on dirt it's your on asphalt!

            Comment

            • Matt49
              Senior Member
              • Jun 2007
              • 3123

              #7
              Originally posted by HMS27 View Post
              The 4 bar cars started out with 2 or 3 holes on the top and bottom brackets. The old tube type bird cages were just one hole. Car builders decided to put 10,000 holes everywhere so you could really put yourself out in left field. Lol
              As with any adjustment, you can dial yourself in or dial yourself out. Really depends on whether you're guessing when making changes or doing it with an expected outcome.

              Comment

              • 25drtrkr
                Senior Member
                • May 2015
                • 856

                #8
                Originally posted by HMS27 View Post
                The 4 bar cars started out with 2 or 3 holes on the top and bottom brackets. The old tube type bird cages were just one hole. Car builders decided to put 10,000 holes everywhere so you could really put yourself out in left field. Lol
                Its funny you say that! Last year at Volusia Speedweeks, Owens broke a rearend and the crew brought out a complete spare to replace it. The birdcages only had 1 hole top and bottom and looked very generic. I started asking a few questions and was told Jimmy builds his own birdcages. that ,of course, was a Bloomer car and Im not sure about his Club cars.
                Lions don't worry about the opinions of sheep.

                Comment

                • 37mod
                  Member
                  • Feb 2008
                  • 88

                  #9
                  Did some garage testing with the bars and found a few interesting angle changes and oversteer amounts on the left rear. One was opposite of what I was expecting. Not sure when I would need this setup so for now I'll just let someone else experiment with it.

                  Comment

                  • HMS27
                    Member
                    • May 2011
                    • 57

                    #10
                    I've seen more negative results than positive ones from moving bars. I do agree that when the right move is made it makes a car look like it has 50 more hp then another. But I still say more is not always better.
                    If your not racing on dirt it's your on asphalt!

                    Comment

                    Working...
                    X