Black Front Rocket

[DJ-76]

Need some ideas on what's going on. Put it on scales and coming up at -170 left rear. Checked everything I know to check. Out of ideas.

[25drtrkr]

If that's at the correct ride height its no big deal. Just do this until you get the correct bite: 1 round out LF, 1 round in RF, 2 in LR, 2 out RR. This usually adds 50 lbs bite and the ride heights stay the same.

[TheJet-09]

Might sound silly but I would make sure your scale cables are connected to the correct pad. Been there, done that...

[Matt49]

Might sound silly but I would make sure your scale cables are connected to the correct pad. Been there, done that...

Ha ha! I think everybody has done this at least once. The first (and last) time this happened to us, we adjusted on the car for the better part of an hour before we spotted the problem. I was pacing the shop floor mumbling, "this doesn't make any sense" the entire time.

[PushinTheLimit]

That's why we use grain scales, cause I'm sure that would be something I would do with the digital scales.

[7uptruckracer]

I've done that before even asked if they were plugged in right but the way he had the readout oriented and the way he was standing in front of the car he said YUP......3 hours later....we fixed it

[ric78]

Might sound silly but I would make sure your scale cables are connected to the correct pad. Been there, done that...

I am glad I am not the only one to have done this.

[rakracing]

yep done that also, only difference was after changing whole car around was that I won that week then we found the problem, #80 rr weight but it only worked on that night on that track condition, who new!