Looking for opinions or considerations on any advantage/disadvantage if you have the option of running a dropped interior (at the firewall) versus one that is not (flush with the back of the hood, drops to behind the driver then up to the spoiler). Thanks in advance!
Dropped Interior versus Not?
Collapse
X
-
I won't get into the aero side, but for me a dropped one is much easier to get out the right side if needed.
-
-
I know when I bought my bwrc it had the flat deck. The next year it was dropped. Then went back to flat at some point I believe now I'm pretty sure theu are dropped again. The cvr I just got is dropped and I cam feel the air moving my head around alot more coming over the tunnel area that chip builds.
Comment
-
I like the dropped for safety reason although I know none of us will ever get caught pinned against the wall by another car that's on fire making it impossible to get out the drivers 'window'...
I've been on fire and burned twice... it ain't fun.Member of the Luxemburg Speedway Hall of Fame
Class of 2019
Comment
-
A little off topic but never a bad time to talk about safety.
Most full containment seats make a passenger side exit nearly impossible.
So I've considered cutting an escape hatch in my roof. Just something with a piano hinge in front and a simple clip in the back.
Comment
-
I've considered that idea for normal entrance and exit, sometimes the window can be a *bad word* to get in and out of with the full containment seat. I've got an older rocket, and every time I redo the body I seem to open the window up more and more.
If I'm not mistaken I think Rayburn was doing this way back in the day (roof hatch), could be a fuzzy memory, but I believe he was trying to make it mandatory for safety reasons but it never really caught a following.Here's my little home on Youtube!
http://www.youtube.com/user/AmickRacing
Home Page
http://www.AmickRacing.com
Comment
-
The cars CJ was showing up to Brownstown with this season all had a flip down section in the door that opened up the "window" about 6 more inches to get in and out. Hard to explain but the driver side of the interior and top six or so inches flipped out together so that you basically had the entire clearance from the top of the top door bar to the bottom of the halo.Originally posted by AmickRacing View PostI've considered that idea for normal entrance and exit, sometimes the window can be a *bad word* to get in and out of with the full containment seat. I've got an older rocket, and every time I redo the body I seem to open the window up more and more.
If I'm not mistaken I think Rayburn was doing this way back in the day (roof hatch), could be a fuzzy memory, but I believe he was trying to make it mandatory for safety reasons but it never really caught a following.
Comment
-
When I brought that up in a UMP meeting I got laughed at. I lost all respect for UMP on that day.
Comment
-
UMP hasn't deserved any respect since Sam Driggers was put in charge. They care about body measurements and Hoosier tire money. Safety isn't even on their radar.Originally posted by Lizardracing View PostWhen I brought that up in a UMP meeting I got laughed at. I lost all respect for UMP on that day.
Comment
-
Years ago when you dropped the deck right behind the motor.We would drill holes in the straight up piece to let air out.There is a low pressure area right behind the drop.I'm switching my car over to a gradual drop that stops beside the driver then starts back up.
Comment
Comment