BLK front rocket question

[HMS27]

I have a 07 BLK front Rocket. It has the 2 piece lowers and I was thinking of going to the one piece on the rt frt. Anyone ever switched over to the 1 piece and if so how did it work out?

[jrkracing54]

They work just fine. That is all I ever used on my black front car. John 1*

[r2rocket]

I have an 08 with 1 piece lowers. It's all I've run on this car. Never had a problem. Been driving it 2 years now, won 1 race last year and have been fairly competitive most weeks we unload.

[hipower17]

we still have the two piece i feel the one piece was a money thing myself.

[save the racers]

I've always thought it was a money thing too.I can make a 1piece lower for 35 to 40$ not counting hiems.

[HMS27]

Thanks guys. The reason I was going to switch was because the rubber bushing is worn out and I can't seem to find them to replace it. I've searched the Web and thought I'd found them through Poskies but their not the right ones. I'll call Rocket on Monday.

[AmickRacing]

Get rid of the rubber bushings.
Cut the tube off and weld in some threaded bungs (several places sell them, A&A Manufacturing for example).
Screw a good heim in there, you'll probably need a couple of spacers, and you'll be set.

[jrkracing54]

Get rid of the rubber bushings.
Cut the tube off and weld in some threaded bungs (several places sell them, A&A Manufacturing for example).
Screw a good heim in there, you'll probably need a couple of spacers, and you'll be set.

PPM already makes lowers this way. I also found the spacers through them too I think. I had to have mine cut down but that was no big deal. I actually liked the rubber bushing style from Rocket better and went back to them. John 1*