Rocket spindle to raise RF

[RacerX10]

Rocket quoted me $800 for crossmember and $1200 for rear clip. That was 2 weeks ago.

I'd probably do that if Rocket Chassis Inc wasn't a 2,000 mile round trip for me

[RacerX10]

325-350 with a 1/2' bump stop to try and help it from bottoming out

good to know .. thanks !

[rakracing]

we had guys bottoming out, they started running 29" rr tires on the front instead of drop spindles. had to raise the rear frame heights also, the rocket I was running still bottomed out even with the cross member ,with soft spring on the rf something is gonna hit, blew out three berlin rf shocks also, believe you should keep enough rf spring to stop it and soften or stiffen lf to tighten or loosen.

[RacerX10]

325-350 with a 1/2' bump stop to try and help it from bottoming out

Seems like the bump stops that most guys are running are 2+ inches tall .. was your bump stop there only to keep it from bottoming ?

[phenom08]

Yea that's all it was for

[RacerX10]

Yea that's all it was for

Ah ok .. thanks for your reply !

[DEKconsulting]

Raising ur front end even .5 inch takes steering ability away bad