If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a PAC Bump spring stack it's two 1" springs a 500 and a 800 and with the cups it ends up being a 2.5 tall assembly with a top and bottom cup and a divider cup so that's where I got that number. My question is basically what are the dual stages setting gap at these days. We want the nose on the ground but traveling so far and running a lockout stack I don't see how they are getting the nose on the ground without more gap when we use to run so they don't lockout To a still spring too soon
what rate primary spring are you using with this set up? I left the bump stop for the two stage stacked set up to help on a rougher track, but have been thinking of trying a bump spring set up to try and find a happy medium , didn't contemplate using a stacked bump spring though.....
Tweet
Comment