Front end

[75t]

My question is we are running a 2008 master built chassis what would cause it to raise the entire front end and kind of squat on the rear of the car what could this potentially mess up doing this thanks.

[TheJet-09]

When or where are you experiencing this? Presumably while racing, at corner exit?

[75t]

Yes this happens while racing while exiting the corner

[Matt49]

Would need to know more about your setup but my first guess would be that you have your 5th coil out pretty far from the rear end and/or possibly have too stiff of a spring in it.

[Mr.Kennedy777]

1. Insufficient bar angles (upper and lower on 4 bar, lowers on 3rd link) OR the bars are longer.2. Not enough anti-squat (torque link/lift arm setting)3. Too much front spring/shocks rebound too quickly 4. Not enough rear spring/shocks compress too quicklyI imagine this issue would land in that area somewhere. Doesn't exactly narrow it down but those would be your list of possible culprits. I would tend to lean more towards bar angles, lengths and lift arm/torque link set up.