Brake shoes and pads

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NDHobbyRacer
    Junior Member
    • Feb 2013
    • 9

    #1

    Brake shoes and pads

    Looking for some recommendations for shoes and pads on an IMCA hobby stock. I've only ever used your local part store cheap pads and shoes. Any help is greatly appreciated.
  • ToddSmith16
    Senior Member
    • May 2007
    • 2854

    #2
    Hawk "Black"

    Comment

    • NDHobbyRacer
      Junior Member
      • Feb 2013
      • 9

      #3
      Should I install on both front wheels, or a Hawk on the left front and a stock on the right front. Thanks for the info.

      Comment

      • SRXSRULE
        Senior Member
        • Jan 2011
        • 217

        #4
        If you want the car to pull left when braking only do one side. I personaly think "ANY" kind of left to right brake biais is a bad idea. Not only for the obvious reason that the car will pull left at all times when braking and may cause a wreck in a panic stop trying to aviod a spin, BUT in the process of getting the front end to turn in better it also gets the rear of the car started into a loose from the center off condition.

        Black hawks are great, you may also want to try a "Severe Duty" pad from you local parts store. They are a very heavy metalic pad with great stopping power. Eric

        Comment

        • NDHobbyRacer
          Junior Member
          • Feb 2013
          • 9

          #5
          Thanks toddsmith and Eric, your advice is greatly appreciated.

          Comment

          Working...
          X