disk brake on rear of 7.5 gm

[fattboyee]

i have been looking and the easiest thing i see to use for the roters is off of a 1998 4x4 blazer .

what have yall used?
i would order the kit but i have alot of metric calipers and even some weld on brackets.
thanks
butch

[archie142]

Jeep cherokee front rotors. Have to open lug holes but work great. jeep 5x4.5 metric 5x4.75

[dirttrackrocker]

S-10 blazer or truck 4x4 is the easiest and cheapest way to go. You may have to do just a little minor grinding on the outside edge of the axle flange. Most of the weld on brackets are too tall also, so you'll have to trim the bottom off.

[21 racer]

late model s-10 or s-10 blazer disc brake rear end take off the parts put on your rear end