Camshaft help

[fastpro28]

Hi Im trying to find a good Hydraulic camshaft for my motor, its a 358 with world heads 72 cc flat tops, my engine guy wants me to stay under .500 lift, our track is a 1/3 mile with tight slightly banked corners and he wants a range from just under 3000 RPM to just over 6500. Any help would be great.

[justramit]

I would call Charles at camcraft.

[Krooser]

Camcraft www.camcraftcams.com or Mike Jones @ www.jonescams.com … both great cam grinders. For the same $$$ or just a few bucks more you can get a custom grind that works very well.

Off the shelf cams are not the hot set-up IMHO.

[racer67x]

when we had to run a hyd cam we had good luck with an Isky 280h..

280 duration 488 lift if I remember right,find something comparable and it should work pretty good.
won alot of races with that cam..