Ride height settings

[dirtslinger4]

What's the correct way to measure front ride heights on stock front clip chassis when measuring by ball joint. What's measurement for rf and lf? Thanks

[Towers21]

Anybody??? Camaro clip, stock lowers tube uppers.

[stock car driver]

lower a arms LEVEL is a good start

That would be center of inner bolt to center of bj socket

[Racer96m]

Measure from center of A arm inner mount bolt to the ground. Measure from center of lower balljoint pivot ball to the ground (You have to figure out where that is and mark your A arm so you will be consistent with your measurements). You generally want the RF an 1/8th to 1/4 in higher outside to inner and the LF level to 1/8th lower outside to inner.

Dave