Tweet
Where on the rear end is it best to have the springs located ? As close to the tire you can or in board closer to the frame ? Reason why im asking is i have a clip car set up as a 3 link and the springs are located inside of the frame rails both on top. The car seems very un-predictable. THX
-
-
Lighter springs mounted outboard would be the more consistent than heavier springs mounted inboard.
Dave2012 UMP Stock Car National Champions.
2013 UMP Modified Rookie of the Year
2014 Kankakee Speedway UMP Modified Champion
2016 Fairbury American Legion Speedway UMP Modified Champion
2016 Kankakee Speedway UMP Modified Champion
2016 UMP Modified, Northen IL Regional Champion
2018 UMP Modified, #2 National Points Standings
Like us on Facebook, https://www.facebook.com/McKinneyMotorsports -
I think there should be lifeguards in the genepool.Comment
-
The previous owner of this car said he tried every thing to make it handle. The one thing i thought was to get the springs as close to the wheels as possible. Pan hard bar, 3 link, Lots of froward traction but never know what it's going to be like from one week to the next thru the corners. Thanks for the responses.Comment
Comment