1.600cc pinto engine

[dirtdemon#4]

Is there any parts to make this engine be fast or possabily be fast?
Headers
camshafts
any information would be greatly apprecated
Also runing a 2.14 tranny with a 3.27 rearend on a 4-10th mile track
trying to get better rpms

[boportt]

holly crap u r going to turn 8500+ with that gear on that big a track.

1.6 moter is whats used for the 1600cc racing devision for open wheel super v or what ever go to scca.org to look up that class

theres an as s load of part 4 them

[ATOYOTA]

IDK why anyone would want such a small engine in a ministock when most guys are going strokers. That motor ran for years in the Formula Ford 1600 class. Here's a really expensive parts source http://www.pegasusautoracing.com/adv...egoryID=ENGINE

[dirtdemon#4]

When you run in a bonestock class with buyout rules Im just runing whatever i can find I have another car this one is just a toy

[cakraft24]

just wonderin...is this the pushrod or SOHC 1600 engine you have?

[dirtdemon#4]

Push rod Camshaft is inside of block

[RMinOZ]

http://en.wikipedia.org/wiki/Ford_Kent_engine

Affectionately called Kent Crossflow, or just crossflow.

To cheer u up straight away.......they come in a 1300cc and a 1100cc variant.

Still used in Formula Ford and ford? has recently re cast the blocks.

http://www.burtonpower.com/tuning-guides/tuning-guide-pages/ford-kent-crossflow-tuning-guide.html

http://www.pumaracing.co.uk/cflow.htm

[RMinOZ]

There was even a single over head cam conversion.

[RMinOZ]

and a double

[dirtdemon#4]

But does those people ship to the u.s.a

[RMinOZ]

But does those people ship to the u.s.a

........Who ?