johnson cam

[mus06]

can anyone tell me if the 525 johnson hyd cam is it any good 3/8 low banked dirt i run a 7.00 final drive

[drtlvr]

If it's the same .525 johnson cam I've been running, I think it's one of the best around. I didn't know it was hydraulic though. I've been running it solid.

[JBV-HEADS]

If it is the old JM 161 cam they can be ground to be very good in lift limited or 3/4 blend heads. Good luck,

Joe

[drtlvr]

I never had a card on it but the specs were 260 dur. @.050, .525 lift, 105 lobe seperation. Duration numbers at .200, .300 and .400 are good too. I set it at 103. I'm sort-of in the market for a new cam with no lift rule. Any suggestions?