Air filter

[Wild Blue 32]

Other than the K&N oval air filter what air filters are you guys running on your Ford 2.3s.

[Dirtman29]

Other than the K&N oval air filter what air filters are you guys running on your Ford 2.3s.

I have run paper filters with no problems, usually a 10" round X 3" tall fram (I THINK its a CA192). Blow the dust out weekly, lasts about 4-5 nites, depending on how dusty track gets.

[jatchis]

We run standard paper 14x3 filters, with Moroso foam pre-filter.

[Milford Motorsports]

We run the KN 14 x 3 round filter with the KN top hat filter on top.Just need to find a base that will clear the valve cover.

[car62]

your local NAPA..or any parts store for that matter makes an air filter "riser" that goes between carb and filter base to raise it..they come in a 3 pack with 1/4...1/2...and 1 inch spacers for about $7

[jatchis]

We get them completely out from under the hood, so we get ambient air, rather than the hotter, under the hood air. We just get a cheap CalCustom, or Mr Gasket velocity stack, cut a 14" base so it has an 8" hole, and rivet it to the top of the velocity stack Seal it up with silicone, and you're good to go.

[Wild Blue 32]

We have to use a stock 5200 holly/weber carb. Is there an air filter housing made to use an aftermarket air filter or do I have to make my own? I would like to run about an 8 to 10 inch filter. Preferably something I can clean.