rear end

[poor boy]

has anyone tried yawing or crabbing the rear end to the right on mustang ministock for corner speed

[steveshawjr]

i belive alot do. i run 1/2 static in my car . under load its a bout 4" or more (3link) would help on a tight cornner track if not its not needed much on a big wide open tyep but you could always try

[drtlvr]

I've turned the rearend on some of my cars but never over 3/4 inch static.

[poor boy]

rear end

i have a stock 7.5 upper & lower control arms any ideas on how to do this on my rear end

[steveshawjr]

offset bushing , cut and shorten the trailing arms, re drill holes.. there is lots of ways. there is no huge benefit to it you could work in other areas of the car to get it to tun better.

[steveshawjr]

you could even do it in the front by mounting the left side of the k back some aswell like i said lots of ways