2.3 slow to take off

[r3tracing]

our 2.3 is very slow to take off on starts and restarts. once it gets goin it is really fast and has won several races. we turn around 8000 after it gets going but we give up several car lengths on the start and would like to stop that. any suggestions like cam timing, ign anything would be great. thank you to everyone as we have got alot of help off of this board in the past. amazing how much knowledge there is on here.

[robdog98]

More info

You really need to give up more information.
What are RPM are you staring in?
What is your cam?
What carb are you running
What size boosters in the carb.
What gear are you starting in?
What size track do you run at

There are many variables that need to be looked at before we can start to diagnose your issue.
DR

[crazyhorse]

is your cam advanced or retarded?

[r3tracing]

cam is esslinger solid, carb is a 350, stock intake. i think the rpm is just to low on the start for cam to start pulling. cam is set with e bar not advanced or retarded right now. running 2nd gear. the carb must pass all the tech gauges. track is 3/8

[dannyracer6]

what is your gear ratio in 2nd, what rear gear ratio. What distributor are you running. Is it a tfi or a vac advance type. dura spark. Need more information. Also, which esslinger cam are you running.

[crazyhorse]

try advancing it 2 degrees and see it that helps off the corner

[gcreech]

Light clutch/flywheel if possible

[millerlt3]

Try to change your restart by backing off and timing to get a run on the rest of the cars because you said your winning races with the car i dont know if i would change to much. just my opinion

[r3tracing]

Try to change your restart by backing off and timing to get a run on the rest of the cars because you said your winning races with the car i dont know if i would change to much. just my opinion

that is what i was trying to tell my son. he is only 13 so you know he doesnt always listen to dad. thank you maybe he will think about it some. i really think if he tries this it will be better.

[crazyhorse]

i bought a head from johnson machine and ran the cam straight up and it was a dog of the corner but at the flagstand it took off. called Tim and he told me to advance it 4 degrees- did and it pulled great off the corner after that.

[r3tracing]

can you give me the phone number or website for this johnson machine crazyhorse. Thank you for any help.

[Dan32]

can you give me the phone number or website for this johnson machine crazyhorse. Thank you for any help.

864 697 6067 is the # but good luck with these guys there chasers around where we race 3rd 4th place cars!

[canopieman2002]

864 697 6067 is the # but good luck with these guys there chasers around where we race 3rd 4th place cars!

Dan o where is your race shop and what your tech line number?

[Dan32]

Dan o where is your race shop and what your tech line number?

oh i have that # for you 1 800 EAT SHIOT !!! ask for ministock judge free hand job with advice!! and he makes house calls!! (((:

[canopieman2002]

oh i have that # for you 1 800 EAT SHIOT !!! ask for ministock judge free hand job with advice!! and he makes house calls!! (((:

Man your old lady wasnt suppose to tell you about that.