mustang lower control arm

[mustangracer24]

I have a 1980 model foxbody mustang and I was wanting to know if they are a longer lower control out there so I can get a little more camber. I already have caster camber plates but I can only get -4 camber on the right side and it isnt enough.

[84Dave]

Rules permitting, add some length to the lower arm? -84Dave-

[Dirtss70]

I've heard '89 and up the lower right a-arm is longer. I don't know for sure but maybe someone on here can answer if it's true.

[dannyracer6]

The T bird lower will work too. It is longer.

[mark41]

95 and up lca's are 1 inch longer and yields roughly 6 degrees of negative camber, with a stock type upper strut towers.

[millerlt3]

stock fox body is 13" from centerline to ball joint center the 89 svo has 14" center to center and i believe the tbird is 13 3/4