2300 Bronze Distributor Gears

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • car62
    Senior Member
    • May 2007
    • 1579

    #1

    2300 Bronze Distributor Gears

    I know this isnt the classifieds,but alot more people are on this part of the forum...so on that note...

    I have 30 new Bronze gears left at $45ea shipped USPS Priority Mail

    You can PM me or call/text me at 208-625-1528
    No matter how hard you try...you cant fix stupid!!!

    If you build it right...it will turn left!!!

    www.raceidaho.com
  • dannyracer6
    Senior Member
    • May 2007
    • 1063

    #2
    Erick, I have heard that the bronze gears do not do well on the stock cast shaft gear. Have you had good luck with them. I have never run a bronze gear and have only lost one stock gear, and that was because the pin sheared off, I never free rev the engine until it is at least 140 degrees and then when I do it, it is not too often. Other wise, I would try one.

    Dan
    dr6 motorsports

    Comment

    • car62
      Senior Member
      • May 2007
      • 1579

      #3
      we have run 2 with stock shafts for 2 seasons and no issues,the rest of our engines have the billet shafts...and again no issues.
      No matter how hard you try...you cant fix stupid!!!

      If you build it right...it will turn left!!!

      www.raceidaho.com

      Comment

      Working...
      X