2.8

[modified101]

What do you need to build a 2.3 into a 2.8 ford? Can someone give me bore, stroke of crank, which crank to use, piston pin height and who has the pistons for this besides esslinger? Please help. PM me

[J.D. Laramee]

2800

In my opinion, the deck height is too short to make a 2.8. Go with something like a 3.810 bore 3.650 stroke. This will still leave you enough room for a decent length rod(5.45 or there abouts)depending on piston comp. height. Engine size will finish at 2726cc and run freier then the bigger stroke of 3.785 which would come out to 2827cc

[let-r-eat]

Agree with JD. I like a 3.595 stroke with the 5.7 honda rod journal 1.771 which uses an .860 compression height piston. I have a combo like this I could sell.

[return to dirt]

lre, what do you want for the combo and is it just the crank and rods?

olin

[let-r-eat]

Its a rotating assembly. Crank Rods PIstons..........you can pm me and I'll give you a # to call. I probably have a block I could put it in.