idle pressure too low?

[hughesracing9]

hey guys, I have a new motor set up on alky
running KSE tandem with bypass blocked off with the kse regulator and return on the back of the log.
Reg came standard with a 76 jet.

I set my race pressure at 9psi, but my idle pressure is .5psi.
KSE doesnt have any set guideline for the idle jet like they do with the pressure screw(1/8 turn = 1 psi)

so my question, does anyone have a recommendation on what size to jump down to? or does it even matter as long as it idles and i have fuel when i press the long pedal?

[powerslide]

I wouldn't worry about idle unless you have a stumble or something. What kind of pressure does it have about 3500-4000? A lot of guys power steering hardly works with those KSE's in the pits because of the ratio of the pulleys but is fine on the track.

[hughesracing9]

im just over 9psi at 3k rpm

[stock car driver]

idle psi doesnt matter, you want it low

9 is good at 3k you should be good to go