Brinn transmission

[1cln_sdime]

Yes doing it that way for a few years never had to jack the car up and all that, always had it level on the lift just have another person push the pedal then i open the bleader, then shut the bleeder then release the pedal has always worked for me in just a few times good luck and let me know if this works for u......... we did have one tranny one time that had the plunger on the clutch inside messed up and it was releasing fluid in the tranny but doubt that is ur issue

[powerslide]

not sure if it was discussed but your M/C should be a 3/4

[powerslide]

we did have one tranny one time that had the plunger on the clutch inside messed up and it was releasing fluid in the tranny but doubt that is ur issue

can you tell me a little more about this. My fluid mysteriously disappears throughout the night. PM me if you like