Transmission tailshaft bushing worn, drive shaft yoke bind create handling problem?

[want2bfast2]

I was wondering if a tail shaft bushing that is worn so that the drive shaft yoke is loose in it would possibly create a bind and a handling problem? This is a Brinn transmission in a 4 Bar car. My car has not bean handling as good as it was and the only thing I have found so far is the yoke seams loose in tailshaft. I clean and grease the yoke quite often but never have change the bushing.Transmission has about 80 nights on it. Any help on this would be greatly appreciated. Thanks

[BigBlueFord]

You can pickup a new bushing and seal (Timken 5200) at most any auto parts store.