Wheel stud replacement ?

[wrench1]

Has anyone ever tried to remove the wheel studs from a Frankland or Winters style 5 on 5 floater hub? Sounds easy but they seem to be pressed in so tight that I'm afraid I'm going to bust the Hub.

[kraftkar7x]

Smack them with a hammer they will come out

[chapa9]

Spray a little WD-40 on em or some nut buster spray. Keep smackin it with a hammer.

[hammond]

on the older Winters hub the studs are screwed in . Just look on the back side of the hub where the studs at and see if there is a flange or not on the stud. No flange its screwed in.