Tweet
when running nova lowers with metric spindles do you still use the stock pitman arm and idler arm? my tie rods are very close to the center link, and I think they may touch.
-
-
I have never run this combo, but, I would have to say no.. The nova lowers put the bottom ball joint ahead of where the metrics would be. Also be aware, if you ran metrics before and are changing to Novas, you will need to relocate your upper shock mounts and switch to 5" springs. Also the Novas go on the opposite side. Right goes on left and Left goes on right.
This may be stuff you already know, but, just making sure you are aware -
We ran that and it is close but it will work.Comment
-
thanx for the help guysComment
Comment