Centering rear end in 07 pierce

[CHRISTINE]

Is there a mesurment maybe from the 2x2 jay bar tube to the pinion or somthing like that to go off of? i got bsb birdcages on my car so i cant use the standard 15 degrees bob says to.

[not clamped up]

drop a plumbob from the left side overrail closest to the LR tire side and measure to the rotor 6 1/4 clamped 6 5/8 springbehind is what we use to use. Car does need to be at ride heights as long as your tail isn,t bent that will work.

[CHRISTINE]

Pierce

Ok ill give that a try. Why farther to left with the spring behind?

[not clamped up]

seemed to help a tad with sidebite,with the extra 3/8 an a 3 inch offset on the RR thats about it for moving the RR tire in because of the tail width on the 07's.