Eliminator on a shaw

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Racin85
    Member
    • Aug 2007
    • 87

    #1

    Eliminator on a shaw

    I got an 08 mod was wondering if i have to run the heims all the way in on the eliminator? When putting the chain on the left rear was is the measurment i need and do i have to put an extensio on the shock on the front of the rear end
  • k.shaw
    Senior Member
    • Oct 2008
    • 154

    #2
    On the 08 car you will probably run a 1 in. shock extension on
    the shock on the front of the birdcage. The measurement to set the
    chain on the left rear is 16 in. from the top of the axle tube to the
    bottom of the upper rail. the chain should be tight at 16 in. If the chain is
    loose and you are not at the 16 in. measurement then you will need
    to either lengthen the eliminator or the shock or both. Keep in mind your
    trailing arms need to be set to length and the 4-bars in the correct positions
    on the chassis before setting this measurement.
    Thanks Kevin Shaw

    Comment

    Working...
    X