08 Pierce Bump steer

[1Blacksheep]

Im really tired of bending the RF Tierod when it bottoms on the frame.Has anyone droped the mount on the spindle or anything to give more clearance other than notching frame? Really dont want to spend hours messing with a spacer if someone can confirm it Jacks all the front Geometry to @#$%^. From what I have played with so far don't look good . Its Metric spindles . Thanks

[oldtrackchamp4x]

I just run a prebent tierod on the right side.

[mediaad]

Thanks!!!!!!!!!!!!!!!!!!!!!!!!!

[1Blacksheep]

Prebent was an option I was thinkin, but it looked like the hiem was at its limit after last frame incounter. May try bending it in an S to keep it closer. Thanks.Still Looking for answer on spacers.

[Dirtrunner35]

I just cut a piece of pipe and cut it in 2 and cut out the frame, well my brother did it, lol It took a little while to do. If you don't do this make sure you have a extra bent tie rod.

[CHRISTINE]

Bump

Have you ever actually checked the bump on your car? I have a 07 and ended up and mine did the same thing till i checked my bump steer it was right with a 3/8 spacer in the rf. Mine never hits anymore